PTFE Thread Seal Tape Teflon Sealant Tapes For Pipe Fittings

100% PTFE Thread Seal Tape For Screw Pipe Fittings

Product Descriptions

PTFE (Poly Tetra Fluoro Ethylene) is generally known to the public by the brand name Teflon® (DuPont™) and is quite commonly referred to as white tape, thread seal tape or plumber's tape. PTFE is compatible with a wide range of materials due to a low coefficient of friction and is very non-reactive.

PTFE Thread Seal Tape is widely used for general water plumbing applications because of its consistent quality. 

Instructions

1: Place the end of the PTFE thread seal tape on the pipe thread 1/8” (3mm) from the end of the pipe and hold down with your finger.

2: Wrap the PTFE thread tape around in the opposite direction the threads will turn, stretching slightly to pull the tape into the threads.

3: Keep slight tension on the tape as you continue to wrap (about 4-6 times), moving down the threads.

4: Then pull on the thread-sealing tape to break it and smooth the end down onto the threads.

5: You are now ready to install your item.

Features

* Chemically inert and withstands solvents.

* Provides tight assembly and easy disassembly.

* Flame resistant.

* No curing time required.

Technical Data

Standard dimensions as below

* Customized sizes are also available from us.

* TS-11 and TS-12 Yellow Gas Line Thread Tape with PTFE

Applications
1. Chemistry industry: used in sealing, pipeline, pipe fitting, and high pure agentia household utensils, etc.
2. Machine: used in piston ring, guide ring, machine tool guideways, etc.
3. Electrical and Electronic Engineering: used in electric wire, electric cable, electrical condenser film, insulation board, etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: PTFE product has nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics, etc.

Frequently Asked Questions

1: Can it be used on shower pipes?

* This is typical PTFE thread seal tape that you use for pipe thread connections on potable water. It can be used with hot or cold and indoors or outdoors.

2: Does this have adhesive?

* No adhesive. It sticks by being so thin. It seems to mold itself onto the threads, especially if you put some tension on it as you wrap.

3: Can this tape be used for kitchen faucet?

* Yes, the tape is suitable for that application.

4: How many times should I wrap it around the pipe?

* Just wrap it around until all the threads are covered. 3 or 4 times should be good.

5: What are your contact details?

And you can contact us by email at sales@cndeerhunter.com

Mobile/Whatsapp/Wechat: +86-13823789007
Skype: FULLCHANCE100